Extra heavy duty concealed magnetic catch suitable for large/heavy
Interior doors, heavy pivot doors, entrance doors etc.
- Can be used anywhere a roller/ball catch etc. would normally be fitted.
- As magnets don’t touch (after installation)
– the catch will never wear out!
– Lifetime guarantee (for magnetism).
– can be painted over. - No latch noise when opening and shutting door (unlike a roller/ball catch)
- Completely concealed when door closed, no unsightly protruding strike plate lip (unlike a roller/ball catch).
- Can be used to help keep problem doors shut (e.g. with weak door
closers, electric strikes, weak roller mortice locks). - Patented new design/installation procedure – Much easier and faster to install than traditional ‘rectangular face’ roller/ball catches and rectangular strikeplates etc, due an innovative and patented design/installation process that uses mainly drilling with a 24mm(15/16″) spade or forstner drill bit, and only a minimal amount of chiseling to create the recesses required to flush mount the magnetic assemblies (FIG 1).
- Power adjustment spacer rings – Increase magnetic holding strength by fitting power adjustments rings (under flanged lip of magnetic assembly) as required. (See FIG 1.4).
5x (1mm thick) S/steel rings supplied for precise power adjustments. - Self Adhesive Cover Plate (Brushed S/Steel)
– Protects magnets from impact damage during installation.
– Protects magnets from corrosion.
– Conceals magnet and screw head for a more attractive finish.
Adhesive: 3M9448A – provides very high bonding strength and excellent
durability. - Poron Xrd Foam impact absorption pad (sold separately)
– Use (esp. with double doors) to further reduce impact noise and
bouncing of door on frame when shutting.
– Low compression set – After impact, foam pad will return to its
original thickness indefinitely.
Home | Hardware | Hinges and Magnets |
Â
Â










Reviews
There are no reviews yet.